Testing a C7036 Straight Lane Changer

lrg7768

Testing a C7036 Straight Lane Changer

Disconnect the track piece and check that the rail connections are all good.

Check that there are no obstructions in the slot preventing the flipper from physically moving. It should 'flip' by hand freely.

Ensure that the track piece hasn't been bent (stood on, for instance) which will also cause the flipper to not move freely.

Reconnect the track piece and turn power on. Manually move the flipper in to the position which would cause the car to change lane. Manually push a car over the track lane change sensor (this is a round hole about one car length before the flipper). The flipper should flip back to the 'straight ahead' position.

Print page