Power and Control Base - Multi-lane 175mm x 2 Plus two hand controllers
Product Code: C8241
This Power and Control base can be used on any Standard Scalextric layout to allow racing on up to eight lanes at once.
2 x Hand Controllers
1 x Scalextric Sport Powerbase Multilane Extension
1 x Half Straight
Please Note: This powerbase requires P9200 Transformer, which has a round end and is not included in this pack.
Build up to eight lanes of racing action. Fully compatible with both Scalextric Sport and Scalextric Classic track. Add one multi-lane extension for every two extra lanes in your circuit. One or two transformer operation. Gives fully independent power and control to each car when two transformers are used. The two enhanced specification 60 ohms hand controllers give smooth acceleration and dynamic braking.
C8241 physically connects to Lanes 1 & 2 and extension wires run from C8241 under the track to lanes 3 and 4 (or 5 & 6 or 7 & 8) where the wires are then connected to a standard straight or half straight.
This product is not suitable for use with Scalextric Digital layouts.
- Battery Requirements: None
This product is not suitable for children under 3 years because of small parts which can present a choking hazard. Some components have functional sharp edges. Handle with care. This product is intended for indoor use only. Please refer to safety notes in the main set instruction leaflet. Colours and contents may vary from those illustrated. Made in China. Retain these detail, and the address for future reference.