F1 EasyFit Digital Plug
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!
F1 EasyFit Digital Plug
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis.
The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.
C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.
To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug.
Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.
* Four car and six car powerbases available
- Age Suitability: 7+
Write a review
Be the first to submit a review for this product.
I would like to ask when the F1 EasyFit Plug In Chip is available? Thank you for your answer. Best regards Michael Burkhard
We are expecting more stock of the C8516 F1 EasyFit Digital Plug in the next few months. Please check the expected arrival date above for the latest info (found below the price, on the right).
Ask A Question
Answer This Question
This product is not suitable for children under 3 years because of small parts which can present a choking hazard. Some components have functional sharp edges. Handle with care. Only use this product with the recommended transformer. Please refer to safety notes in the main set instruction leaflet. Colours and contents may vary from those illustrated. Made in China. Retain these detail, and the address for future reference.
Colour and contents of products may vary from those illustrated